Arithmetic operators

Returns the result of specific arithmetic operation.

Operator name	Syntax	Overloadable	Prototype examples (for class T)
Operator name	Syntax	Overloadable	Inside class definition	Outside class definition
unary plus	`+a`	Yes	T T::operator+() const;	T operator+(const T &a);
unary minus	`-a`	Yes	T T::operator-() const;	T operator-(const T &a);
addition	`a + b`	Yes	T T::operator+(const T2 &b) const;	T operator+(const T &a, const T2 &b);
subtraction	`a - b`	Yes	T T::operator-(const T2 &b) const;	T operator-(const T &a, const T2 &b);
multiplication	`a * b`	Yes	T T::operator*(const T2 &b) const;	T operator*(const T &a, const T2 &b);
division	`a / b`	Yes	T T::operator/(const T2 &b) const;	T operator/(const T &a, const T2 &b);
modulo	`a % b`	Yes	T T::operator%(const T2 &b) const;	T operator%(const T &a, const T2 &b);
bitwise NOT	`~a`	Yes	T T::operator~() const;	T operator~(const T &a);
bitwise AND	`a & b`	Yes	T T::operator&(const T2 &b) const;	T operator&(const T &a, const T2 &b);
bitwise OR	`a \| b`	Yes	T T::operator\|(const T2 &b) const;	T operator\|(const T &a, const T2 &b);
bitwise XOR	`a ^ b`	Yes	T T::operator^(const T2 &b) const;	T operator^(const T &a, const T2 &b);
bitwise left shift	`a << b`	Yes	T T::operator<<(const T2 &b) const;	T operator<<(const T &a, const T2 &b);
bitwise right shift	`a >> b`	Yes	T T::operator>>(const T2 &b) const;	T operator>>(const T &a, const T2 &b);
Notes All built-in operators return values, and most user-defined overloads also return values so that the user-defined operators can be used in the same manner as the built-ins. However, in a user-defined operator overload, any type can be used as return type (including void). In particular, stream insertion and stream extraction overloads of `operator<<` and `operator>>` return `T&`. `T2` can be any type including `T`

If the operand passed to an arithmetic operator is integral or unscoped enumeration type, then before any other action (but after lvalue-to-rvalue conversion, if applicable), the operand undergoes integral promotion. If an operand has array or function type, array-to-pointer and function-to-pointer conversions are applied.

For the binary operators (except shifts), if the promoted operands have different types, additional set of implicit conversions is applied, known as usual arithmetic conversions with the goal to produce the common type (also accessible via the std::common_type type trait)

If either operand has scoped enumeration type, no conversion is performed: the other operand and the return type must have the same type

Otherwise, if either operand is long double, the other operand is converted to long double

Otherwise, if either operand is double, the other operand is converted to double

Otherwise, if either operand is float, the other operand is converted to float

Otherwise, the operand has integer type (because bool, char, char16_t, char32_t, wchar_t, and unscoped enumeration were promoted at this point) and integral conversions are applied to produce the common type, as follows:

If both operands are signed or both are unsigned, the operand with lesser conversion rank is converted to the operand with the greater integer conversion rank

Otherwise, if the unsigned operand's conversion rank is greater or equal to the conversion rank of the signed operand, the signed operand is converted to the unsigned operand's type.

Otherwise, if the signed operand's type can represent all values of the unsigned operand, the unsigned operand is converted to the signed operand's type

Otherwise, both operands are converted to the unsigned counterpart of the signed operand's type.

The conversion rank above increases in order bool, signed char, short, int, long, long long. The rank of any unsigned type is equal to the rank of the corresponding signed type. The rank of char is equal to the rank of signed char and unsigned char. The ranks of char16_t, char32_t, and wchar_t are equal to the ranks of their underlying types.

[edit] Overflows

Unsigned integer arithmetic is always performed $modulo 2 n$ where n is the number of bits in that particular integer. E.g. for unsigned int, adding one to UINT_MAX gives 0, and subtracting one from 0 gives UINT_MAX.

When signed integer arithmetic operation overflows (the result does not fit in the result type), the behavior is undefined: it may wrap around according to the rules of the representation (typically 2's complement), it may trap on some platforms or due to compiler options (e.g. -ftrapv in GCC and Clang), or may be completely optimized out by the compiler.

[edit] Floating-point environment

If #pragma STDC FENV_ACCESS is set to ON, all floating-point arithmetic operators obey the current floating-point rounding direction and report floating-point arithmetic errors as specified in math_errhandling unless part of a static initializer (in which case floating-point exceptions are not raised and the rounding mode is to nearest)

[edit] Unary arithmetic operators

For every promoted arithmetic type A and for every type T, the following function signatures participate in overload resolution:

A operator+(A)
T* operator+(T*)
A operator-(A)

The builtin unary plus operator returns the value of its operand. The only situation where it is not a no-op is when the operand has integral type or unscoped enumeration type, which is changed by integral promotion, e.g, it converts char to int or if the operand is subject to lvalue-to-rvalue, array-to-pointer, or function-to-pointer conversion.

The builtin unary minus operator calculates the negative of its operand. For unsigned a, the value of -a is $2 b -a$ , where b is the number of bits after promotion.

Run this code

#include <iostream>
int main()
{
    char c = 0x6a;
    int n1 = 1;
    unsigned char n2 = 1;
    unsigned int n3 = 1;
    std::cout << "char: " << c << " int: " << +c << '\n'
              << "-1, where 1 is signed: " << -n1 << '\n'
              << "-1, where 1 is unsigned char: " << -n2 << '\n'
              << "-1, where 1 is unsigned int: " << -n3 << '\n';
    char a[3];
    std::cout << "size of array: " << sizeof a << '\n'
              << "size of pointer: " << sizeof +a << '\n';
}

Output:

char: j int: 106
-1, where 1 is signed: -1
-1, where 1 is unsigned char: -1
-1, where 1 is unsigned int: 4294967295
size of array: 3
size of pointer: 8

[edit] Additive operators

For every pair of promoted arithmetic types L and R and for every object type T, the following function signatures participate in overload resolution:

LR operator+(L, R)
LR operator-(L, R)
T* operator+(T*, std::ptrdiff_t)
T* operator+(std::ptrdiff_t, T*)
T* operator-(T*, std::ptrdiff_t)
std::ptrdiff_t operator-(T, T)

where LR is the result of usual arithmetic conversions on L and R

With operands of arithmetic or enumeration type, the result of binary plus is the sum of the operands (after usual arithmetic converesions), and the result of the binary minus operator is the result of subtracting the second operand from the first (after usual arithmetic conversions).

If any of the operands is a pointer, the following rules apply:

A pointer to non-array object is treated as a pointer to the first element of an array with size 1.
If the pointer P points to the ith element of an array, then the expressions P+n, n+P, and P-n are pointers of the same type that point to the i+nth, i+nth, and i-nth element of the same array, respectively. The result of pointer addition may also be a one-past-the-end pointer (that is, pointer P such that the expression P-1 points to the last element of the array). Any other situations (that is, attempts to generate a pointer that isn't pointing at an element of the same array or one past the end) invoke undefined behavior.
If the pointer P points to the ith element of an array, and the pointer Q points at the jth element of the same array, the expression P-Q has the value i-j, if the value fits in std::ptrdiff_t. Both operands must point to the elements of the same array (or one past the end), otherwise the behavior is undefined. If the result does not fit in std::ptrdiff_t, the behavior is undefined.
In any case, if the type of the pointer is different from the array element type (in particular, pointer to base, pointing at an element of an array of derived objects), the behavior of pointer arithmetic is undefined.
If the value 0 is added or subtracted from a pointer, the result is the pointer, unchanged. If two pointers point at the same object or are both one past the end of the same array, or both are null pointers, then the result of subtraction is equal to (std::ptrdiff_t)0.

These pointer arithmetic operators allow pointers to satisfy the RandomAccessIterator concept.

Run this code

#include <iostream>
int main()
{
    char c = 2;
    unsigned int un = 2;
    int  n = -10;
    std::cout <<  " 2 + (-10), where 2 is a char    = " << c + n << '\n'
              <<  " 2 + (-10), where 2 is unsigned  = " << un + n << '\n'
              <<  " -10 - 2.12  = " << n - 2.12 << '\n';
 
    char a[4] = {'a', 'b', 'c', 'd'};
    char* p = &a[1];
    std::cout << "Pointer addition examples: " << *p << *(p + 2)
              << *(2 + p) << *(p - 1) << '\n';
    char* p2 = &a[4];
    std::cout << "Pointer difference: " << p2 - p << '\n';
}

Output:

2 + (-10), where 2 is a char    = -8
 2 + (-10), where 2 is unsigned  = 4294967288
 -10 - 2.12  = -12.12
Pointer addition examples: bdda
Pointer difference: 3

[edit] Multiplicative operators

For every pair of promoted arithmetic types LA and RA and for every pair of promoted integral types LI and RI the following function signatures participate in overload resolution:

LRA operator*(LA, RA)
LRA operator/(LA, RA)
LRI operator%(LI, RI)

where LRx is the result of usual arithmetic conversions on Lx and Rx

The binary operator * performs multiplication of its operands (after usual arithmetic conversions).

The binary operator / divides the first operand by the second (after usual arithmetic conversions).If the second operand is zero, the behavior is undefined. For integral operands, it yields the algebraic quotient.

The quotient is rounded in implementation-defined direction.	(until C++11)
The quotient is truncated towards zero (fractional part is discarded).	(since C++11)

The binary operator % yields the remainder of the division of the first operand by the second (after usual arithmetic conversions). If the quotient a/b is representible in the result type, (a/b)*b + a%b == a. If the second operand is zero, the behavior is undefined. If the quotient a/b is not representible in the result type, the behavior of both a/b and a%b is undefined (that means INT_MIN%-1 is undefined on 2's complement systems)

Note: Until C++11, if one or both operands to binary operator % were negative, the sign of the remainder was implementation-defined, as it depends on the rounding direction of integer division. The function std::div provided well-defined behavior in that case.

Run this code

#include <iostream>
int main()
{
    char c = 2;
    unsigned int un = 2;
    int  n = -10;
    std::cout <<  "2 * (-10), where 2 is a char    = " << c * n << '\n'
              <<  "2 * (-10), where 2 is unsigned  = " << un * n << '\n'
              <<  "-10 / 2.12  = " << n / 2.12 << '\n'
              <<  "-10 / 21  = " << n / 21 << '\n'
              <<  "-10 % 21  = " << n % 21 << '\n';
}

Output:

2 * (-10), where 2 is a char    = -20
2 * (-10), where 2 is unsigned  = 4294967276
-10 / 2.12  = -4.71698
-10 / 21  = 0
-10 % 21  = -10

[edit] Bitwise logic operators

For every pair of promoted integral types L and R the following function signatures participate in overload resolution:

R operator~(R)
LR operator&(L, R)
LR operator^(L, R)
LR operator\|(L, R)

where LR is the result of usual arithmetic conversions on L and R

The result of operator~ is the bitwise NOT (one's complement) value of the argument (after promotion). The result of operator& is the bitwise AND value of the operands (after usual arithmetic conversions). The result of operator| is the bitwise OR value of the operands (after usual arithmetic conversions). The result of operator^ is the bitwise XOR value of the operands (after usual arithmetic conversions)

Run this code

#include <iostream>
int main()
{
    std::cout << std::hex << std::showbase;
    uint16_t mask = 0x00f0;
    uint32_t a = 0x12345678;
    std::cout << "Value: " << a << " mask: " << mask << '\n'
              << "Setting bits: " << (a | mask) << '\n'
              << "Clearing bits: " << (a & ~mask) << '\n'
              << "Selecting bits: " << (a & mask) << '\n';
}

Output:

Value: 0x12345678 mask: 0xf0
Setting bits: 0x123456f8
Clearing bits: 0x12345608
Selecting bits: 0x70

[edit] Bitwise shift operators

For every pair of promoted integral types L and R, the following function signatures participate in overload resolution:

L operator<<(L, R)
L operator>>(L, R)

The operands of the built-in bitwise shift operators have either integral types or unscoped enumeration type. Integral promotions are performed on both operands before evaluation. The return type is the type of the left operand after integral promotions.

For unsigned a, the value of a << b is the value of $a * 2 b$ , reduced modulo maximum value of the return type plus 1 (that is, bitwise left shift is performed and the bits that get shifted out of the destination type are discarded). For signed a, the value of a << b is $a * 2 b$ if it is representable in the unsigned version of the return type (which is then converted to signed: this makes it legal to create INT_MIN as 1<<31), otherwise the behavior is undefined.

For unsigned a and for signed a with nonnegative values, the value of a >> b is the integer part of $a/2 b$ . For negative a, the value of a >> b is implementation-defined (in most implementations, this performs arithmetic right shift, so that the result remains negative)

In any case, if the value of the right operand is negative or is greater or equal to the number of bits in the promoted left operand, the behavior is undefined.

Run this code

#include <iostream>
enum {ONE=1, TWO=2};
int main()
{
    std::cout << std::hex << std::showbase;
    char c = 0x10;
    unsigned long long ull = 0x123;
    std::cout << "0x123 << 1 = " << (ull << 1) << '\n'
              << "0x123 << 63 = " << (ull << 63) << '\n' // overflow in unsigned
              << "0x10 << 10 = " << (c << 10) << '\n';   // char is promoted to int
    long long ll = -1000;
    std::cout << std::dec << "-1000 >> 1 = " << (ll >> ONE) << '\n';
}

Output:

0x123 << 1 = 0x246
0x123 << 63 = 0x8000000000000000
0x10 << 10 = 0x4000
-1000 >> 1 = -500

[edit] Standard library

Arithmetic operators are overloaded for many standard library types.

[edit] Unary arithmetic operators

operator+operator-	implements unary + and unary - (public member function of `std::chrono::duration`)
operator+operator-	applies unary operators to complex numbers (function template)
operator+operator-operator~operator!	applies a unary arithmetic operator to each element of the valarray (public member function of `std::valarray`)

[edit] Additive operators

operator+operator-	modifies the time point by the given duration (function template)
operator+	concatenates two strings or a string and a char (function template)
operator+operator-	advances or decrements the iterator (public member function of `std::reverse_iterator`)
operator+operator-	advances or decrements the iterator (public member function of `std::move_iterator`)
operator+operator-operator*operator/	performs complex number arithmetics on two complex values or a complex and a scalar (function template)
operator+operator-operator*operator/operator%operator&operator\|operator^operator<<operator>>operator&&operator\|\|	applies binary operators to each element of two valarrays, or a valarray and a value (function template)

[edit] Multiplicative operators

operator+operator-operator*operator/operator%	implements arithmetic operations with durations as arguments (function template)
operator+operator-operator*operator/	performs complex number arithmetics on two complex values or a complex and a scalar (function template)
operator+operator-operator*operator/operator%operator&operator\|operator^operator<<operator>>operator&&operator\|\|	applies binary operators to each element of two valarrays, or a valarray and a value (function template)

[edit] Bitwise logic operators

operator&=operator\|=operator^=operator~	performs binary AND, OR, XOR and NOT (public member function of `std::bitset`)
operator&operator\|operator^	performs binary logic operations on bitsets (function)
operator~	applies a unary arithmetic operator to each element of the valarray (public member function of `std::valarray`)
operator^operator&operator\|	applies binary operators to each element of two valarrays, or a valarray and a value (function template)

[edit] Bitwise shift operators

operator<<operator>>	applies binary operators to each element of two valarrays, or a valarray and a value (function template)
operator<<operator>>	performs binary shift left and shift right (public member function of `std::bitset`)

[edit] Stream insertion/extraction operators

Throughout the standard library, bitwise shift operators are commonly overloaded with I/O stream (std::ios_base& or one of the classes derived from it) as both the left operand and return type. Such operators are known as stream insertion and stream extraction operators:

operator>>	extracts formatted data (public member function of `std::basic_istream`)
operator>>(std::basic_istream)	extracts characters and character arrays (function template)
operator<<	inserts formatted data (public member function of `std::basic_ostream`)
operator<<(std::basic_ostream)	inserts character data (function)
operator<<operator>>	serializes and deserializes a complex number (function template)
operator<<operator>>	performs stream input and output of bitsets (function)
operator<<operator>>	performs stream input and output on strings (function template)
operator<<operator>>	performs stream input and output on pseudo-random number engine (function)
operator<<operator>>	performs stream input and output on pseudo-random number distribution (function)

[edit] See also

Operator precedence

Common operators
assignment	increment decrement	arithmetic	logical	comparison	member access	other
a = b a += b a -= b a *= b a /= b a %= b a &= b a \|= b a ^= b a <<= b a >>= b	++a --a a++ a--	+a -a a + b a - b a * b a / b a % b ~a a & b a \| b a ^ b a << b a >> b	!a a && b a \|\| b	a == b a != b a < b a > b a <= b a >= b	a[b] a &a a->b a.b a->b a.*b	a(...) a, b (type) a ? :
Special operators
`static_cast` converts one type to another compatible type `dynamic_cast` converts virtual base class to derived class `const_cast` converts type to compatible type with different cv qualifiers `reinterpret_cast` converts type to incompatible type `new` allocates memory `delete` deallocates memory `sizeof` queries the size of a type `sizeof...` queries the size of a parameter pack (since C++11) `typeid` queries the type information of a type `noexcept` checks if an expression can throw an exception (since C++11) `alignof` queries alignment requirements of a type (since C++11)

Language
Standard library headers
Concepts
Utilities library
Strings library
Containers library
Algorithms library
Iterators library
Numerics library
Input/output library
Localizations library
Regular expressions library (C++11)
Atomic operations library (C++11)
Thread support library (C++11)

General
value categories (lvalue, rvalue, xvalue)
order of evaluation (sequence points)
constant expressions
unevaluated expressions
primary expressions
lambda-expression(C++11)
Literals
integer literals
floating-point literals
boolean literals
character literals including escape sequences
string literals
null pointer literal(C++11)
user-defined literal(C++11)
Operators
Assignment operators: `a=b`, `a+=b`, `a-=b`, `a*=b`, `a/=b`, `a%=b`, `a&=b`, `a\|=b`, `a^=b`, `a<<=b`, `a>>=`
Increment and decrement: `++a`, `--a`, `a++`, `a--`
Arithmetic operators: `+a`, `-a`, `a+b`, `a-b`, `a*b`, `a/b`, `a%b`, `~a`, `a&b`, `a\|b`, `a^b`, `a<<b`, `a>>b`
Logical operators: `a\|\|b`}, `a&&b`, `!a`
Comparison operators: `a==b`, `a!=b`, `a<b`, `a>b`, `a<=b`, `a>=b`
Member access operators: `a[b]`, `a`, `&a`, `a->b`, `a.b`, `a->b`, `a.*b`
Other operators: `a(...)`, `a,b`, `(T)a`, `a?b:c`
Alternative representations of operators
Precedence and associativity
new-expression
delete-expression
throw-expression
alignof
sizeof
sizeof...(C++11)
typeid
noexcept(C++11)
Operator overloading
Conversions
Implicit conversions
const_cast
static_cast
reinterpret_cast
dynamic_cast
Explicit conversions `(T)a`, `T(a)`
User-defined conversion

Arithmetic operators

Contents

[edit] Explanation

[edit] Conversions

[edit] Overflows

[edit] Floating-point environment

[edit] Unary arithmetic operators

[edit] Additive operators

[edit] Multiplicative operators

[edit] Bitwise logic operators

[edit] Bitwise shift operators

[edit] Standard library

[edit] Unary arithmetic operators

[edit] Additive operators

[edit] Multiplicative operators

[edit] Bitwise logic operators

[edit] Bitwise shift operators

[edit] Stream insertion/extraction operators

[edit] See also