std::printf, std::fprintf, std::sprintf, std::snprintf

Defined in header `<cstdio>`
int printf( const char* format, ... );	(1)
int fprintf( std::FILE* stream, const char* format, ... );	(2)
int sprintf( char* buffer, const char* format, ... );	(3)
int snprintf( char* buffer, std::size_t buf_size, const char* format, ... );	(4)	(since C++11)

Loads the data from the given locations, converts them to character string equivalents and writes the results to a variety of sinks.

1) Writes the results to stdout.

2) Writes the results to a file stream stream.

3) Writes the results to a character string buffer.

4) Writes the results to a character string buffer. At most buf_size - 1 characters are written. The resulting character string will be terminated with a null character, unless buf_size is zero.

-: the result of the conversion is left-justified within the field (by default it is right-justified)
+: the sign of signed conversions is always prepended to the result of the conversion (by default the result is preceded by minus only when it is negative)
space: if the result of a signed conversion does not start with a sign character, or is empty, space is prepended to the result. It is ignored if + flag is present.
# : alternative form of the conversion is performed. See the table below for exact effects.
0 : for integer and floating point number conversions, leading zeros are used to pad the field instead of space characters. For floating point numbers it is ignored if the precision is explicitly specified. For other conversions using this flag results in undefined behavior. It is ignored if - flag is present.

(optional) integer value or * that specifies minimum field width. The result is padded with space characters (by default), if required, on the left when right-justified, or on the right if left-justified. In the case when * is used, the width is specified by an additional argument of type int. If the value of the argument is negative, it results with the - flag specified and positive field width.

(optional) . followed by integer number or * that specifies precision of the conversion. In the case when * is used, the precision is specified by an additional argument of type int. If the value of this argument is negative, it is ignored. See the table below for exact effects of precision.

(optional) length modifier that specifies the size of the argument

conversion format specifier

The following format specifiers are available:

Conversion specifier	Explanation	Argument type
length modifier		`hh`	`h`	(none)	`l`	`ll`	`j`	`z`	`t`	`L`
`%`	writes literal `%`. The full conversion specification must be `%%`.	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A
`c`	writes a single character. The argument is first converted to unsigned char. If the l modifier is used, the argument is first converted to a character string as if by %ls with a wchar_t[2] argument.	N/A	N/A	int	wint_t	N/A	N/A	N/A	N/A	N/A
`s`	writes a character string The argument must be a pointer to the initial element of an array of characters. Precision specifies the maximum number of bytes to be written. If Presition is not specified, writes every byte up to and not including the first null terminator. If the l specifier is used, the argument must be a pointer to the initial element of an array of wchar_t, which is converted to char array as if by a call to std::wcrtomb with zero-initialized conversion state.	N/A	N/A	char*	wchar_t*	N/A	N/A	N/A	N/A	N/A
`d` `i`	converts a signed integer into decimal representation [-]dddd. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters.	signed char	short	int	long	long long	intmax_t	signed size_t	ptrdiff_t	N/A
`o`	converts a unsigned integer into octal representation oooo. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation precision is increased if necessary, to write one leading zero. In that case if both the converted value and the precision are 0, single 0 is written.	unsigned char	unsigned short	unsigned int	unsigned long	unsigned long long	uintmax_t	size_t	unsigned version of ptrdiff_t	N/A
`x` `X`	converts an unsigned integer into hexadecimal representation hhhh. For the `x` conversion letters `abcdef` are used. For the `X` conversion letters `ABCDEF` are used. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters. In the alternative implementation `0x` or `0X` is prefixed to results if the converted value is nonzero.									N/A
`u`	converts an unsigned integer into decimal representation dddd. Precision specifies the minimum number of digits to appear. The default precision is 1. If both the converted value and the precision are 0 the conversion results in no characters.									N/A
`f` `F`	converts floating-point number to the decimal notation in the style [-]ddd.ddd. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes.	N/A	N/A	double	no effect	N/A	N/A	N/A	N/A	long double
`e` `E`	converts floating-point number to the decimal exponent notation. For the `e` conversion style [-]d.ddd`e`±dd is used. For the `E` conversion style [-]d.ddd`E`±dd is used. The exponent contains at least two digits, more digits are used only if necessary. If the value is 0, the exponent is also 0. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is 6. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes.	N/A	N/A			N/A	N/A	N/A	N/A
`a` `A`	converts floating-point number to the hexadecimal exponent notation. For the `a` conversion style [-]`0x`h.hhh`p`±d is used. For the `A` conversion style [-]`0X`h.hhh`P`±d is used. The first hexadecimal digit is `0` if the argument is not a normalized floating point value. If the value is 0, the exponent is also 0. Precision specifies the minimum number of digits to appear after the decimal point character. The default precision is sufficient for exact representation of the value. In the alternative implementation decimal point character is written even if no digits follow it. For infinity and not-a-number conversion style see notes.	N/A	N/A			N/A	N/A	N/A	N/A
`g` `G`	converts floating-point number to decimal or decimal exponent notation depending on the value and the precision. For the `g` conversion style conversion with style `e` or `f` will be performed. For the `G` conversion style conversion with style `E` or `F` will be performed. Let `P` equal the precision if nonzero, 6 if the precision is not specified, or 1 if the precision is 0. Then, if a conversion with style `E` would have an exponent of `X`: if P > X ≥ −4, the conversion is with style `f` or `F` and precision P − 1 − X. otherwise, the conversion is with style `e` or `E` and precision P − 1. Unless alternative representation is requested the trailing zeros are removed, also the decimal point character is removed if no fractional part is left. For infinity and not-a-number conversion style see notes.	N/A	N/A			N/A	N/A	N/A	N/A
`n`	returns the number of characters written so far by this call to the function. The result is written to the value pointed to by the argument. The complete specification must be `%n`.	signed char*	short*	int*	long*	long long*	intmax_t*	signed size_t*	ptrdiff_t*	N/A
`p`	writes an implementation defined character sequence defining a pointer.	N/A	N/A	void*	N/A	N/A	N/A	N/A	N/A	N/A
Notes: The floating point conversion functions convert infinity to `inf` or `infinity`. Which one is used is implementation defined. Not-a-number is converted to `nan` or `nan(char_sequence)`. Which one is used is implementation defined. The conversions `F`, `E`, `G`, `A` output `INF`, `INFINITY`, `NAN` instead. Even though `%c` expects `int` argument, it is safe to pass a `char` because of the integer promotion that takes place when a variadic function is called The correct conversion specifiers for the fixed-width character types (std::int8_t, etc) are defined in the header <cinttypes>

... - arguments specifying data to print. If any argument is not the type expected by the corresponding conversion specifier, or if there are less arguments than required by format, the behavior is undefined. If there are more arguments than required by format, the extraneous arguments are evaluated and ignored

[edit] Return value

1-2) Number of characters written if successful or negative value if an error occurred.

3) Number of characters written if successful (not including the terminating null-byte) or negative value if an error occurred.

4) Number of characters written if successful (not including the terminating null-byte) or negative value if an error occurred. If the resulting string gets truncated due to buf_size limit, function returns the total number of characters (not including the terminating null-byte) which would have been written, if the limit was not imposed.

[edit] Notes

POSIX specifies that errno is set on error.

[edit] Example

Run this code

#include <cstdio>
#include <limits>
#include <cstdint>
#include <cinttypes>
 
int main()
{
    std::printf("Strings:\n");
 
    const char* s = "Hello";
    std::printf("\t.%10s.\n\t.%-10s.\n\t.%*s.\n", s, s, 10, s);
 
    std::printf("Characters:\t%c %%\n", 65);
 
    std::printf("Integers\n");
    std::printf("Decimal:\t%i %d %.6i %i %.0i %+i %u\n", 1, 2, 3, 0, 0, 4, -1);
    std::printf("Hexadecimal:\t%x %x %X %#x\n", 5, 10, 10, 6);
    std::printf("Octal:\t%o %#o %#o\n", 10, 10, 4);
 
    std::printf("Floating point\n");
    std::printf("Rounding:\t%f %.0f %.32f\n", 1.5, 1.5, 1.3);
    std::printf("Padding:\t%05.2f %.2f %5.2f\n", 1.5, 1.5, 1.5);
    std::printf("Scientific:\t%E %e\n", 1.5, 1.5);
    std::printf("Hexadecimal:\t%a %A\n", 1.5, 1.5);
    std::printf("Special values:\t0/0=%g 1/0=%g\n", 0./0, 1./0);
 
    std::printf("Variable width control:\n");
    std::printf("right-justified variable width: '%*c'\n", 5, 'x');
    int r = std::printf("left-justified variable width : '%*c'\n", -5, 'x');
    std::printf("(the last printf printed %d characters)\n", r);
 
    // fixed-width types
    std::uint32_t val = std::numeric_limits<std::uint32_t>::max();
    std::printf("Largest 32-bit value is %" PRIu32 " or %#" PRIx32 "\n", val, val);
}

Output:

Strings:
        .     Hello.
        .Hello     .
        .     Hello.
Characters:     A %
Integers
Decimal:        1 2 000003 0  +4 4294967295
Hexadecimal:    5 a A 0x6
Octal:  12 012 04
Floating point
Rounding:       1.500000 2 1.30000000000000004440892098500626
Padding:        01.50 1.50  1.50
Scientific:     1.500000E+00 1.500000e+00
Hexadecimal:    0x1.8p+0 0X1.8P+0
Special values: 0/0=nan 1/0=inf
Variable width control:
right-justified variable width: '    x'
left-justified variable width : 'x    '
(the last printf printed 40 characters)
Largest 32-bit value is 4294967295 or 0xffffffff

[edit] See also

vprintfvfprintfvsprintfvsnprintf (C++11)	prints formatted output to stdout, a file stream or a buffer using variable argument list (function)
fputs	writes a character string to a file stream (function)
scanffscanfsscanf	reads formatted input from stdin, a file stream or a buffer (function)
C documentation for printf, fprintf, sprintf, snprintf

Language
Standard library headers
Concepts
Utilities library
Strings library
Containers library
Algorithms library
Iterators library
Numerics library
Input/output library
Localizations library
Regular expressions library (C++11)
Atomic operations library (C++11)
Thread support library (C++11)

I/O manipulators
C-style I/O
Buffers
basic_streambuf
basic_filebuf
basic_stringbuf
strstreambuf (deprecated)
Streams
Abstractions
ios_base
basic_ios
basic_istream
basic_ostream
basic_iostream
File I/O
basic_ifstream
basic_ofstream
basic_fstream
String I/O
basic_istringstream
basic_ostringstream
basic_stringstream
Array I/O
istrstream (deprecated)
ostrstream (deprecated)
strstream (deprecated)
Types
streamoff
streamsize
fpos
Error category interface
iostream_category (C++11)
io_errc (C++11)

std::printf, std::fprintf, std::sprintf, std::snprintf

Contents

[edit] Parameters

[edit] Return value

[edit] Notes

[edit] Example

[edit] See also